Maintenance

Keep your Spinner from dusty environments. Don’t put your Spinner on the carpet or any fabrics. Dust may be brought into the internal surface of the shell by the rotor and make the inner tracks dirty. Eventually it would make noise as the rotor spins.

Wash your hands before using the Spinner. Sweat or lotion on your hands will decrease the capability of speeding up the Spinner's RPM. The Speed is increased by the friction between the spinning rotor and the inner tracks. Never lubricate your Spinner. Oil is the killer of its friction.

Clean your Spinner periodically. To clean the Spinner, take off the rubber band, unscrew the shells with a precision screwdriver, insert a coin into the gap between the upper and lower shells and then twist the coin to open the shells. Once you disassemble the Spinner, (remove the digital counter first if your model is equipped with it) use water ONLY to clean the tracks and shells and then dry the parts before re-assembling. For PB-688 series of models, you may also reverse the two inner tracks to make your Spinner spin as smoothly as new. For PB-588 and PB-888 Titan series of models, you may replace the two inner tracks to make them as new.


Subscribe