SEE HOW FAST YOU’RE SPINNING THE NSD SPINNER
NSD is the first on the market to offer a digital speedometer on a Spinner. Our digital speedometer features an advanced counter with LCD display. Use the counter to track the duration of your work-out, the current speed, numbers of revs, current top speed and historical top speed.
The FCN button toggles between the 5 displays of the LCD Counter, the ON/CLR button turns on or off the counter with a single press, or resets previously stored values by holding down the button when the counter is on.
NUMBERS OF REVOLUTIONS
The revolutions counter displays total number of revs in multiples of 100s. For example, when the display shows “45,” it means atotal of 4,5XX revolutions has beencounted so far.
Press the “FCN” button to cycle through the display until the above symbol appears, then press the “ON/CLR” button to reset the counter.
Please note, when speed reaches in excess of 18,000 RPM, the revolution counter will stop counting.
The speed counter displays current speed of the rotor in Revolutions Per Minute, or RPM. For example, when the display shows “12345”, it means the current speed of the spinning rotor is 12,345 RPM.
Press the “FCN” button to cycle through the display until the above symbol appears.
HIGHEST RPM/HISTORICAL TOP RPM
The top speed counter displays the historical highest speed achieved in RPM. For example, when the display shows “12345,” it means the highest speed so far is 12,345 RPM. When the display shows a flashing top speed icon with a flashing score, it means a NEW top speed has been achieved.
Press the “FCN” button to cycle through the display until the above symbol appears. Press the “ON/CLR” button once to clear the top speed for current session (the top speed icon with a circle around it), press the “ON/CLR” button again to reset the historical top speed counter.
PHYSICAL STRENGTH INDEX
The physical strength index counter displays the numbers of revolutions within a 30, 60, or 90 seconds interval. For example, when the display shows “30,”, it will start counting down from 30 seconds and total the number of revs within that time interval, then at the end of the 30 second interval the number of revolutionswill display.
Press the “FCN” button to cycle through the display until the above symbol appears. Press the “ON/CLR” button while the rotor is stationary to cycle through the 3 different intervals, between 30 seconds, 60 seconds, and 90 seconds. Start the rotor of the gyroscope and the countdown will begin as the symbol flashes. Press “ON/CLR” again to reset the counter.
* The "Winner's LED Spinner" (PB-188P Blue) has the electronic speedometer built into the rotor and can only display top RPM in the session.
There are no products matching the selection.